600-WATT 12-INCH 2-WAY POWERED LOUDSPEAKER
600 Watts peak, (300 Watts continuous Class D power)
The newly designed horn delivers greater coverage 90° H x 60° V
The full grille delivers style and provides protection for your investment.
12-inch (305 mm) LF driver, 2-inch (50.8 mm) voice coil
1-inch (25.4 mm) neodymium HF compression driver
Lightweight, portable design for main or wedge monitor operation
Standard speaker pole socket
Bi-amplified design with precision active crossover and EQ
Balanced XLR/TRS with selectable Mic/Line input. XLR Link Output, Contour EQ switch and Ground-Lift switch
Designed and tuned in the USA

TECH INFORMATION
Power Output: 600 W peak (400 W LF + 200 W HF), 300 W continuous (200 W LF + 100 W HF) Class D power
LF Driver: 12-inch (305 mm) LF driver, 2-inch (50.8 mm) voice coil
HF Driver: 1-inch (25.4 mm) neodymium HF compression driver
Crossover: 2.5 kHz
Maximum: 118 dB at 1m
Frequency Response: (-3dB): 70 Hz – 20 kHz
Horn Coverage: 90° H x 60° V nominal
Equalization: Contour Switch Low and High Frequency +3dB Boost
Connectors: (1) XLR/TRS 1/4” (6.35 mm) combo input, (1) XLR link output, (1) IEC power cable input
Controls: (1) Volume, Power on/off switch, Contour switch, Ground-Lift Switch
Indicators: (2) Power LED (front and rear), Clip limiter LED
Protection: Overload Analog Limiter / Compressor, Thermal Protection
Power Supply: 100V-240V ~ 50/60Hz
AC Voltage Input: 100,110-120,220–240 V, 50/60 Hz
Fuse:100–120V T4AL AC250V, 220–240V T2AL AC250V
Power Consumption: 260 W
Enclosure Construction: Injection-molded polypropylene enclosure, multi-angle for main or monitor applications, metal grille, rubber feet, 2 handles (both sides)
Mounting/Installation: Standard speaker pole socket, Wedge Monitor
Dimensions (HxWxD): 23.7" x 15" x 13.7" / 602mm x 381mm x 348mm
Net Weight: 31.3 lbs. / 14.2 kg.

100 W (peak) drives high-quality 10-inch (254 mm) woofer and 1-inch (25.4 mm) tweeter
Microphone volume with mute button, aux volume for 1/8” (3.5 mm) aux and Bluetooth inputs
XLR microphone input (microphone not included), (1) 1/8” (3.5 mm) stereo aux input, (1) 4-pin XLR input (for podium lamp, not included)
Streams music wirelessly from any Bluetooth-enabled device
Built-in rechargeable battery delivers up to 33 hours of continuous use
Battery level indicator
USB charging port for phone, tablet or other devices
Microphone Included

An excellent indoor/outdoor mini 2-way speaker system that is perfect for any application from foreground music to speech reinforcement.

50-WATT PORTABLE RECHARGEABLE BLUETOOTH® PA SYSTEM
Portable self-powered PA speaker
50 watts (peak) drives high-quality 6.5-inch woofer, 2-inch tweeter
Two Line/Mic channels with XLR/1/4” combo inputs
Streams music wirelessly from any Bluetooth-enabled device
NFC pairing and 1/8
Master Volume, Line Out and battery level indicator
Built-in rechargeable battery delivers up to 35 hours continuous use
USB charging port for phone, tablet or other device
Top panel storage tray for smartphones, keys, guitar picks, and more
Rugged design with built-in back handle for easy transport

TECH INFORMATION
Portable self-powered PA speaker
Power Output: 50 Watts peak, (25 Watts continuous power)
LF Driver: 6.5-inch (165.1 mm) woofer
HF Driver: 2-inch (50.8 mm) tweeter
Frequency Response: 90 Hz - 20 kHz
Connectors: (2) Line/Mic channels with XLR-1/4-inch (6.35 mm) TRS combination input, (1) 1/8-inch (3.5 mm) TRS/stereo Aux input, (1) 1/4-inch (6.35 mm) Line-Out, (1) IEC AC power
Controls: (2) Volume controls for Line/Mic channels, (2) Line/Mic selectors, (1) Volume control for Bluetooth® and Aux channels, Master Volume, Bluetooth® pairing button, Power on/off switch
Indicators: Power On, battery level, Bluetooth® pairing status.
Bluetooth®: Profile: A2DP, AVRCP, Range: Up to 100 feet / 30.5 meters
Bluetooth® Connection: Manual pairing or NFC
Battery Type: 12V, 2.8Ah SLA
Power: 100-240V AC, 50/60 HZ, 50W
AC Voltage Input/Fuse: 100-240V / T630mAL AC250V
Dimensions: (H x W x D): 13.3" x 13.2" x 10" / 338mm x 334mm x 254mm
Weight: 12.8 lbs. / 5.8 kg.

A 70 Volt line version of an excellent indoor/outdoor mini 2-way speaker system that is perfect for any application from foreground music to speech reinforcement a with built-in transformer for 70 Volt line distribution systems.

The PR 10 is a two-way sound reinforcement system consisting of a heavy duty 10" woofer and a RX14™ titanium diaphragm, dynamic compression driver mounted on a 90° x 40° coverage constantdirectivity horn.

The PV® 112 is a two-way speaker system based on a 12" heavy/duty woofer and a RX™ 14 titanium diaphragm dynamic compression driver mounted on a 60 by 40 degree coverage constant-directivity horn.

COMPACT HIGH-PERFORMANCE PA SYSTEM
Integrated 3-channel professional audio mixer with volume and 2-band EQ on each channel
(2) XLR+1/4-inch combo inputs + stereo RCA and 1/8-inch inputs. Connect microphones, instruments, DJ mixers, controllers and more
Bluetooth®-equipped-wirelessly stream backing tracks or background music from any Bluetooth-compatible device
Bluetooth Link-Stream a stereo signal to separate speakers—no cables required
Bi-amplified design with (3) 6.5-inch low/mid woofers and a 1-inch high-frequency tweeter
XLR link output for use with additional loudspeakers and subwoofers
Easily transportable: Lightweight (just 23 lbs.) with built-in rear handle
Rubberized feet and 36mm pole socket for stand mounting

TECH INFORMATION
System Type: 2‐way Bi­‐amplified Compact PA System for the Active Performer
High Frequency: 25 mm (1 inch) voice coil Neodymium compression driver
Low Frequency: (3) 6 ½” (165mm) woofers with 1" voice coil
Frequency Range: 65 to 20kHz
Crossover: 1.8 kHz, electronic
Power Amplifier: Bi-­amplified, 200 watt peak (130 W LF + 70 W HF)
Maximum SPL: 117 dB-SPL @ 1 m (continuous), 120 dB-SPL @ 1M (peak)
Electronic Protection: Thermal/overload
Protection Indication: Signal/Limit Red LED
Inputs: 3 channels: Line/Mic 1, Line/Mic 2, Aux
Input Connectors: (2) ¼” XLR female combo connectors, (1) stereo RCA, (1) 1/8” stereo
Output Connectors: (1) XLR male mix output
Equalization: 2-band LF and HF
Bluetooth: A2DP streaming audio, with full stereo link when using two Troupers
Power Controls: On/off power switch, IEC line cord AC input, Power indicator LED
Enclosure Type: Trapeziodal MDF enclosure with black vinyl wrap and protective steel corners
Handle: Rear mounted, ergonomically designed
Stand Mount Socket: (1) female 36mm pole socket
Dimensions: 8.4 x 29.2 x 10.1 in/21.3 x 74.17 x 25.65 cm
Weight: 23 lbs/10.43 kg

The PV® 115 is Peavey's most affordable two-way speaker cabinet with a single 15 inch woofer.

The PR 12 is a two-way sound reinforcement system consisting of a heavy duty 12" woofer and a RX14™ titanium diaphragm, dynamic compression driver mounted on a 90° x 40° coverage constantdirectivity horn.

The PV® 115 is Peavey's most affordable two-way speaker cabinet with a single 15 inch woofer.

The PVX 12 passive loudspeakers deliver superior sound quality by utilizing advanced materials like its lightweight, roadworthy molded polypropylene exterior.

2000-WATT 8-INCH 2-WAY POWERED LOUDSPEAKER
2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF)
8-inch (203 mm) LF driver, 2.5-inch (65 mm) high-temperature voice coil
HF Driver: 1.4-inch (35 mm) neodymium magnet HF driver with precision waveguide
High quality, lightweight, cabinet design for easy transport, set up and installation
Pole-mountable, wedge monitor, bracket installation or flown application with integral M6 suspension points
Integrated 2-channel mixer with dual XLR 1/4-inch combo mic/line inputs, independent level controls, XLR Link output, Contour EQ switch and Ground-Lift switch
Custom-engineered high-efficiency class D amplifiers with passive cooling design – no fan means the speaker runs cleaner, quieter and has greater long-term reliability
Designed and tuned in the USA

TECH INFORMATION
Output Power: 2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF)
LF Driver: 8-inch (203 mm) LF driver, 2.5-inch (65 mm) high-temperature voice coil
HF Driver: 1.4-inch (35 mm) neodymium magnet HF driver with precision waveguide
Crossover: 2.5 kHz
Maximum SPL: 129 dB peak, 126 dB continuous (dB SPL @ 1 m)
Frequency Response: 62 Hz – 20 kHz (+ 3 dB)
Frequency Range: 52 Hz – 22 kHz (-10 dB)
Horn Coverage: 90° H x 60° V nominal
Equalization: Contour Switch Low and High Frequency +3dB Boost
Connectors: (2) XLR/TRS 1/4” (6.35 mm) combo inputs, (1) XLR link output, (1) IEC power cable input
Controls: (2) Volume, Power on/off switch, Contour switch, Ground-Lift switch
Indicators: 2 x Power LED (front and rear), Clip limiter LED
Protection: Electronic clip, Thermal and transducer overdrive protection
Power Connection: IEC with Mains Fuse
AC Voltage Input: 100,110-120,220–240 V, 50/60 Hz
Enclosure: Trapezoidal, injection-molded, polypropylene enclosure, with perforated steel grille
Mounting/Installation: 36 mm standard pole mount, Wall or celling mount using TSB810 bracket, Flown application with integral M6 suspension points, Wedge monitor
Dimensions: (H x W x D): 17.1” x 10.1” x 9.6” / 434mm x 256mm x 245mm
Net Weight: 20.2 lbs. / 9.2 kg.
Design Origin: Designed and tuned in the USA
Accessories: TSB810 Bracket, TS208 Cover

The PR 15 is a two-way sound reinforcement system consisting of a heavy duty 15" woofer and a RX14™ titanium diaphragm, dynamic compression driver mounted on a 90° x 40° coverage constant-directivity horn.