2,000 Watts
2 Piece Portable
Line Array System
Available with Bluetooth
And Bluetooth True Stereo Link

3 Channel
120 WATT Active PA
3 x 6.5" Speakers
Available with Bluetooth

10" Speakers
600 Watts Peak
Available with Bluetooth
And Bluetooth True Stereo Link

12" Speakers
1050 Watts Peak
Available with Bluetooth
And Bluetooth True Stereo Link

1050 Watts
Powered Column Array System
Available with Bluetooth
And Bluetooth True Stereo Link

600-WATT 12-INCH 2-WAY POWERED LOUDSPEAKER
600 Watts peak, (300 Watts continuous Class D power)
The newly designed horn delivers greater coverage 90° H x 60° V
The full grille delivers style and provides protection for your investment.
12-inch (305 mm) LF driver, 2-inch (50.8 mm) voice coil
1-inch (25.4 mm) neodymium HF compression driver
Lightweight, portable design for main or wedge monitor operation
Standard speaker pole socket
Bi-amplified design with precision active crossover and EQ
Balanced XLR/TRS with selectable Mic/Line input. XLR Link Output, Contour EQ switch and Ground-Lift switch
Designed and tuned in the USA

TECH INFORMATION
Power Output: 600 W peak (400 W LF + 200 W HF), 300 W continuous (200 W LF + 100 W HF) Class D power
LF Driver: 12-inch (305 mm) LF driver, 2-inch (50.8 mm) voice coil
HF Driver: 1-inch (25.4 mm) neodymium HF compression driver
Crossover: 2.5 kHz
Maximum: 118 dB at 1m
Frequency Response: (-3dB): 70 Hz – 20 kHz
Horn Coverage: 90° H x 60° V nominal
Equalization: Contour Switch Low and High Frequency +3dB Boost
Connectors: (1) XLR/TRS 1/4” (6.35 mm) combo input, (1) XLR link output, (1) IEC power cable input
Controls: (1) Volume, Power on/off switch, Contour switch, Ground-Lift Switch
Indicators: (2) Power LED (front and rear), Clip limiter LED
Protection: Overload Analog Limiter / Compressor, Thermal Protection
Power Supply: 100V-240V ~ 50/60Hz
AC Voltage Input: 100,110-120,220–240 V, 50/60 Hz
Fuse:100–120V T4AL AC250V, 220–240V T2AL AC250V
Power Consumption: 260 W
Enclosure Construction: Injection-molded polypropylene enclosure, multi-angle for main or monitor applications, metal grille, rubber feet, 2 handles (both sides)
Mounting/Installation: Standard speaker pole socket, Wedge Monitor
Dimensions (HxWxD): 23.7" x 15" x 13.7" / 602mm x 381mm x 348mm
Net Weight: 31.3 lbs. / 14.2 kg.

100 W (peak) drives high-quality 10-inch (254 mm) woofer and 1-inch (25.4 mm) tweeter
Microphone volume with mute button, aux volume for 1/8” (3.5 mm) aux and Bluetooth inputs
XLR microphone input (microphone not included), (1) 1/8” (3.5 mm) stereo aux input, (1) 4-pin XLR input (for podium lamp, not included)
Streams music wirelessly from any Bluetooth-enabled device
Built-in rechargeable battery delivers up to 33 hours of continuous use
Battery level indicator
USB charging port for phone, tablet or other devices
Microphone Included

50-WATT PORTABLE RECHARGEABLE BLUETOOTH® PA SYSTEM
Portable self-powered PA speaker
50 watts (peak) drives high-quality 6.5-inch woofer, 2-inch tweeter
Two Line/Mic channels with XLR/1/4” combo inputs
Streams music wirelessly from any Bluetooth-enabled device
NFC pairing and 1/8
Master Volume, Line Out and battery level indicator
Built-in rechargeable battery delivers up to 35 hours continuous use
USB charging port for phone, tablet or other device
Top panel storage tray for smartphones, keys, guitar picks, and more
Rugged design with built-in back handle for easy transport

TECH INFORMATION
Portable self-powered PA speaker
Power Output: 50 Watts peak, (25 Watts continuous power)
LF Driver: 6.5-inch (165.1 mm) woofer
HF Driver: 2-inch (50.8 mm) tweeter
Frequency Response: 90 Hz - 20 kHz
Connectors: (2) Line/Mic channels with XLR-1/4-inch (6.35 mm) TRS combination input, (1) 1/8-inch (3.5 mm) TRS/stereo Aux input, (1) 1/4-inch (6.35 mm) Line-Out, (1) IEC AC power
Controls: (2) Volume controls for Line/Mic channels, (2) Line/Mic selectors, (1) Volume control for Bluetooth® and Aux channels, Master Volume, Bluetooth® pairing button, Power on/off switch
Indicators: Power On, battery level, Bluetooth® pairing status.
Bluetooth®: Profile: A2DP, AVRCP, Range: Up to 100 feet / 30.5 meters
Bluetooth® Connection: Manual pairing or NFC
Battery Type: 12V, 2.8Ah SLA
Power: 100-240V AC, 50/60 HZ, 50W
AC Voltage Input/Fuse: 100-240V / T630mAL AC250V
Dimensions: (H x W x D): 13.3" x 13.2" x 10" / 338mm x 334mm x 254mm
Weight: 12.8 lbs. / 5.8 kg.

COMPACT HIGH-PERFORMANCE PA SYSTEM
Integrated 3-channel professional audio mixer with volume and 2-band EQ on each channel
(2) XLR+1/4-inch combo inputs + stereo RCA and 1/8-inch inputs. Connect microphones, instruments, DJ mixers, controllers and more
Bluetooth®-equipped-wirelessly stream backing tracks or background music from any Bluetooth-compatible device
Bluetooth Link-Stream a stereo signal to separate speakers—no cables required
Bi-amplified design with (3) 6.5-inch low/mid woofers and a 1-inch high-frequency tweeter
XLR link output for use with additional loudspeakers and subwoofers
Easily transportable: Lightweight (just 23 lbs.) with built-in rear handle
Rubberized feet and 36mm pole socket for stand mounting

TECH INFORMATION
System Type: 2‐way Bi­‐amplified Compact PA System for the Active Performer
High Frequency: 25 mm (1 inch) voice coil Neodymium compression driver
Low Frequency: (3) 6 ½” (165mm) woofers with 1" voice coil
Frequency Range: 65 to 20kHz
Crossover: 1.8 kHz, electronic
Power Amplifier: Bi-­amplified, 200 watt peak (130 W LF + 70 W HF)
Maximum SPL: 117 dB-SPL @ 1 m (continuous), 120 dB-SPL @ 1M (peak)
Electronic Protection: Thermal/overload
Protection Indication: Signal/Limit Red LED
Inputs: 3 channels: Line/Mic 1, Line/Mic 2, Aux
Input Connectors: (2) ¼” XLR female combo connectors, (1) stereo RCA, (1) 1/8” stereo
Output Connectors: (1) XLR male mix output
Equalization: 2-band LF and HF
Bluetooth: A2DP streaming audio, with full stereo link when using two Troupers
Power Controls: On/off power switch, IEC line cord AC input, Power indicator LED
Enclosure Type: Trapeziodal MDF enclosure with black vinyl wrap and protective steel corners
Handle: Rear mounted, ergonomically designed
Stand Mount Socket: (1) female 36mm pole socket
Dimensions: 8.4 x 29.2 x 10.1 in/21.3 x 74.17 x 25.65 cm
Weight: 23 lbs/10.43 kg

2000-WATT 8-INCH 2-WAY POWERED LOUDSPEAKER
2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF)
8-inch (203 mm) LF driver, 2.5-inch (65 mm) high-temperature voice coil
HF Driver: 1.4-inch (35 mm) neodymium magnet HF driver with precision waveguide
High quality, lightweight, cabinet design for easy transport, set up and installation
Pole-mountable, wedge monitor, bracket installation or flown application with integral M6 suspension points
Integrated 2-channel mixer with dual XLR 1/4-inch combo mic/line inputs, independent level controls, XLR Link output, Contour EQ switch and Ground-Lift switch
Custom-engineered high-efficiency class D amplifiers with passive cooling design – no fan means the speaker runs cleaner, quieter and has greater long-term reliability
Designed and tuned in the USA

TECH INFORMATION
Output Power: 2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF)
LF Driver: 8-inch (203 mm) LF driver, 2.5-inch (65 mm) high-temperature voice coil
HF Driver: 1.4-inch (35 mm) neodymium magnet HF driver with precision waveguide
Crossover: 2.5 kHz
Maximum SPL: 129 dB peak, 126 dB continuous (dB SPL @ 1 m)
Frequency Response: 62 Hz – 20 kHz (+ 3 dB)
Frequency Range: 52 Hz – 22 kHz (-10 dB)
Horn Coverage: 90° H x 60° V nominal
Equalization: Contour Switch Low and High Frequency +3dB Boost
Connectors: (2) XLR/TRS 1/4” (6.35 mm) combo inputs, (1) XLR link output, (1) IEC power cable input
Controls: (2) Volume, Power on/off switch, Contour switch, Ground-Lift switch
Indicators: 2 x Power LED (front and rear), Clip limiter LED
Protection: Electronic clip, Thermal and transducer overdrive protection
Power Connection: IEC with Mains Fuse
AC Voltage Input: 100,110-120,220–240 V, 50/60 Hz
Enclosure: Trapezoidal, injection-molded, polypropylene enclosure, with perforated steel grille
Mounting/Installation: 36 mm standard pole mount, Wall or celling mount using TSB810 bracket, Flown application with integral M6 suspension points, Wedge monitor
Dimensions: (H x W x D): 17.1” x 10.1” x 9.6” / 434mm x 256mm x 245mm
Net Weight: 20.2 lbs. / 9.2 kg.
Design Origin: Designed and tuned in the USA
Accessories: TSB810 Bracket, TS208 Cover

600-WATT 15-INCH 2-WAY POWERED LOUDSPEAKER
600 Watts peak, 300 Watts continuous Class D power
The newly designed horn delivers greater coverage 90° H x 60° V
The full grille delivers style and provides protection for your investment
15-inch (381 mm) LF driver, 2-inch (50.8 mm) voice coil
1-inch (25.4 mm) neodymium HF compression driver
Lightweight, portable design for main or wedge monitor operation
Standard speaker pole socket
Bi-amplified design with precision active crossover and EQ
Balanced XLR/TRS with selectable Mic/Line input. XLR Link Output, Contour EQ switch and Ground-Lift switch
Integrated analog limiter and overload protection circuitry
Designed and tuned in the USA

TECH INFORMATION
Power Output: 600 W peak (400 W LF + 200 W HF), 300 W continuous (200 W LF + 100 W HF) Class D power
LF Driver: 15-inch (381 mm) LF driver, 2-inch (50.8 mm) voice coil
HF Driver: 1-inch (25.4 mm) neodymium HF compression driver
Crossover: 2.2 kHz
Maximum: 119 dB at 1m
Frequency Response: (-3dB): 65 Hz – 20 kHz
Horn Coverage: 90° H x 60° V nominal
Equalization: Contour Switch Low and High Frequency +3dB Boost
Connectors: (1) XLR/TRS 1/4” (6.35 mm) combo input, (1) XLR link output, (1) IEC power cable input
Controls: (1) Volume, Power on/off switch, Contour switch, Ground-Lift Switch
Indicators: (2) Power LED (front and rear), Clip limiter LED
Protection: Overload Analog Limiter / Compressor, Thermal Protection
Power Supply: 100V-240V ~ 50/60Hz
AC Voltage Input: 100,110-120,220–240 V, 50/60 Hz
Fuse:100–120V T4AL AC250V, 220–240V T2AL AC250V
Power Consumption: 260 W
Enclosure Construction: Injection-molded polypropylene enclosure, multi-angle for main or monitor applications, metal grille, rubber feet, 2 handles (both sides)
Mounting/Installation: Standard speaker pole socket, Wedge Monitor
Dimensions: (H x W x D): 24.7" x 15.2" x 14.6" / 627mm x 386mm x 371mm
Net Weight: Net Weight: 32.4 lbs / 14.7 kg.

2000-WATT 10-INCH 2-WAY POWERED LOUDSPEAKER
2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF)
10-inch (254 mm) LF driver, 2.5-inch (65 mm) high-temperature voice coil
HF Driver: 1.4-inch (35 mm) neodymium magnet HF driver with precision waveguide
High quality, lightweight, cabinet design for easy transport, set up and installation
Pole-mountable, wedge monitor, bracket installation or flown application with integral M0 suspension points
Integrated 2-channel mixer with dual XLR 1/4-inch combo mic/line inputs, independent level controls, XLR Link output, Contour EQ switch and Ground-Lift switch
Custom-engineered high-efficiency class D amplifiers with passive cooling design – no fan means the speaker runs cleaner, quieter and has greater long-term reliability
Designed and tuned in the USA

TECH INFORMATION
Output Power: 2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF)
LF Driver: 10-inch (254 mm) LF driver, 2.5-inch (65 mm) high-temperature voice coil
HF Driver: 1.4-inch (35 mm) neodymium magnet HF driver with precision waveguide
Crossover: 2.5 kHz
Maximum SPL: 129 dB peak, 126 dB continuous (dB SPL @ 1 m)
Frequency Response: 54 - 20 kHz (+/- 3 dB)
Frequency Range: 48 Hz - 22 kHz (-10 dB)
Horn Coverage: 90° H x 60° V nominal
Equalization: Contour Switch Low and High Frequency +3dB Boost
Connectors: (2) XLR/TRS 1/4” (6.35 mm) combo inputs, (1) XLR link output, (1) IEC power cable input
Controls: (2) Volume, Power on/off switch, Contour switch, Ground-Lift switch
Indicators: 2 x Power LED (front and rear), Clip limiter LED
Protection: Electronic clip, Thermal and transducer overdrive protection
Power Connection: IEC with Mains Fuse
AC Voltage Input: 100,110-120,220–240 V, 50/60 Hz
Enclosure: Trapezoidal, injection-molded, polypropylene enclosure, with perforated steel grille
Mounting/Installation: 36 mm standard pole mount, Wall or ceiling mount using TSB810 bracket, Flown application with integral M10 suspension points, Wedge monitor
Dimensions: (H x W x D): 20.6” x 12.6” x 11.8” / 524mm x 320mm x 300mm
Weight Net Weight: 26.1 lbs. / 11.9 kg.
Design Origin: Designed and tuned in the USA
Accessories: TSB810 Bracket, TS210 Cover

2000-WATT 12" POWERED SUBWOOFER
2000 watts of peak power output
High-efficiency Class D amplifier
Transducer: 12-inch with 3-inch high-temperature voice coil
(2) XLR+1/4-inch combo inputs + (2) balanced XLR line outputs
XLR outputs, with six discreet output modes for ideal matching with companion speaker
Polarity Reverse switch and Extended LF switch for increased EQ control
Electronic clip, thermal and transducer overdrive protection
Rugged, internally-braced front-ported MDF cabinet with integrated 36mm pole socket
Rugged, mar-resistant splatter-spray finish always looks good, even with heavy use
Designed and tuned in the USA

TECH INFORMATION
Output Power: 2000 W peak, 1000 W continuous
Amplifier: High-efficiency Class D amplifier
Transducer: 12” (305 mm) woofer, 3” (76 mm) voice coil
Frequency Response: 44HZ – 95Hz (- 3 dB)
Frequency Range: 38Hz – 110Hz (-10 dB)
Maximum SPL: 129 dB (@ 1 m) 126 dB continuous (dB SPL @ 1 m)
Connections: (2) XLR+1/4” (6.35 mm) inputs; (2) XLR outputs; (1) IEC power cable input
Input Level: Line +4 dBu (nominal)
External Controls: Volume control, output mode switch, polarity-reverse switch, extended low-frequency switch, power switch
Indicators: Signal/clip limiter LED, polarity-reverse LED, extended low-frequency LED, power switch LED
Electronic Protections: Electronic clip, thermal and transducer overdrive protection
Enclosure: Internally braced MDF cabinet; 36 mm mounting pole socket on top panel
Rugged, mar-resistant splatter-spray finish always looks good, even with heavy use
Power Connection: IEC with Mains Fuse
AC Voltage Input: 100,110-120,220–240 V, 50/60 Hz
Consumption: 1000 W Fuse: T10AL AC250V (100–120 V) or T5AL AC250V (220–240 V)
Dimensions (H x W x D): 17.9” x 18.1” x 19.9” / 456mm x 459mm x 505mm
Weight: 55.12 lbs. / 25 kg
Design Origin: Designed and tuned in the USA
Accessories: TS312S Cover

PORTABLE PA SYSTEM WITH DUAL LED LIGHTING
Three channel mixer: line/mic 1, line/mic 2, and Aux
XLR, RCA, ¼” and 1/8” connectors
2-Band (LF/HF) built-in EQ for each channel
Full Bluetooth® capability for streaming input signals wirelessly (plus wireless linking of another Spectrum PA for stereo applications)
Built-in dual LED arrays provide brilliant light show
Five customizable lighting modes: Mood, Meter, Mix, Pulse, Party
Brightness control lets you adjust or disable LEDs
Custom Color Control—easily adjust the desired mix of Red, Green, and Blue lighting
Adds powerful sound and visual flair to any Karaoke event or other performance
Ultra-portable form factor for clean, uncluttered setups
Perfect for any occasion where additional lighting equipment would add clutter
Stand-mountable with 35mm threaded pole socket
Rugged: Scuff-resistant black vinyl wrap and protective steel corners
Easily transportable: Lightweight (just 23 lbs.) and built-in handle.

TECH INFORMATION
System Type: 2-way bi-amplified powered loudspeaker with sound-reactive LED lights
Power Amplifier: Bi-amplified; 200 W peak: 130 W LF + 70 W HF
High Frequency: (1) 1” (25.4 mm) neodymium compression driver
Low Frequency: (3) 6.5” (165 mm) with 1” (25.4 mm) voice coil
Frequency Response: 65 Hz – 20 kHz
Crossover Frequency: 1.8 KHz, electronic
Maximum SPL: 94 dB SPL
Light Type: 38 tri-color (red-green-blue) high-intensity LEDs; 12 W total
Light Modes: 5 modes: Mood, Meter, Mix, Pulse, Party
Light Controls: Mode selection knob; color selection knob with RGB preview LED; brightness knob
Connections: (2) XLR-1/4” (6.35 mm) TRS combination inputs (Channels 1 & 2) (1) 1/8” (3.5 mm) TRS/stereo input (Channel 3) (1) RCA (line-level) stereo input pair (Channel 3) (1) XLR link output (1) IEC AC power connection
Equalization: 2-band (LF, HF) for Channels 1 & 2
Bluetooth: A2DP streaming audio with full stereo link when using 2 Spectrum PA units
Protections: Thermal, overload
Enclosure: Trapezoidal wood cabinet MDF enclosure with vinyl wrap; black metal protective corners; molded, ergonomically designed plastic handle; 4 rubber feet; 36 mm pole socket for stand mounting
AC input: 100 V AC, 50/60 Hz (+10%) 110-120 V AC, 50/60 Hz (+10%) 220-240 V AC, 50/60 Hz (+10%)
Fuse: 100-120 V T1.6AL AC250V 220-240 V T800mAL AC250V
Dimensions (H x W x D): 29.16” x 8.36” x 10.12” / 741 mm x 212 mm x 257 mm
Weight: 22.4 lbs./ 10.2 kg

2000-WATT 15" POWERED SUBWOOFER
2000 watts of peak power output
High-efficiency Class D amplifier
Transducer: 15-inch with 3-inch high-temperature voice coil
(2) XLR+1/4-inch combo inputs + (2) balanced XLR line outputs
XLR outputs, with six discreet DSP output modes for ideal matching with companion full-range speaker
Polarity Reverse switch and Extended LF switch for increased EQ control
Electronic clip, thermal and transducer overdrive protection
Rugged, internally-braced front-ported MDF cabinet with integrated 36mm pole socket
Rugged, mar-resistant splatter-spray finish always looks good, even with heavy use
Designed and tuned in the USA
Dimensions (H x W x D): 21.3” x 20.6” x 24.7” / 542mm x 523mm x 628mm
Weight: 78.48 lbs. / 35.6 kg

TECH INFORMATION
Output Power: 2000 W peak, 1000 W continuous
Amplifier: High-efficiency Class D amplifier
15” (381 mm) woofer, 3” (76 mm) voice coil
Frequency Response: 44Hz – 85Hz (- 3 dB)
Frequency Range: 37Hz – 100Hz (-10 dB)
Maximum SPL: 131 dB (@ 1 m) 128 dB continuous (dB SPL @ 1 m)
Connections: (2) XLR+1/4” (6.35 mm) inputs; (2) XLR outputs; (1) IEC power cable input
Input Level: Line +4 dBu (nominal)
External Controls: Volume control, DSP output mode switch, polarity-reverse switch, extended low-frequency switch, power switch
Indicators: Signal/clip limiter LED, six DSP output mode LEDs, polarity-reverse LED, extended low-frequency LED, power switch LED
Electronic Protections: Electronic clip, thermal and transducer overdrive protection
Enclosure: Internally braced MDF cabinet; 36 mm mounting pole socket on top panel
Rugged, mar-resistant splatter-spray finish always looks good, even with heavy use
Power Connection: IEC with Mains Fuse
AC Voltage Input: 100,110-120,220–240 V, 50/60 Hz
Consumption: 1000 W Fuse: T10AL AC250V (100–120 V) or T5AL AC250V (220–240 V)
Dimensions (H x W x D): 21.3” x 20.6” x 24.7” / 542mm x 523mm x 628mm
Weight: 78.48 lbs. / 35.6 kg
Design Origin: Designed and tuned in the USA
Accessories: TS315S Cover