5-CHANNEL COMPACT MIXER
Six total inputs with a phantom powered XLR jack on channel 1
1/4” Main, Tape, Headphone & Aux outputs for flexible signal routing
Perfect for musicians looking for a compact, capable mixer
Mic input channel with gold plated XLR and balanced line input
Two stereo input channels with balanced TRS jack
High headroom circuitry offering extra dynamic range
Ultra-low-noise discrete mic preamp with Phantom power
Balanced inputs for highest signal integrity and low-noise operation
Warm, natural two-band EQ on mono channel
2-Track inputs w/assignable bus: main mix or headphone out
Highly accurate four-segment bar graph meters
Aux inputs/outputs for external audio source integration
Peak LEDs on each channel

TECH INFORMATION
Mono channel (Ch. 1)
Microphone Input: Electronically balanced, discrete input configuration
Frequency Response: 20 Hz to 22 kHz, +/-1 dB
Distortion( THD&N): ≦0.005% at +4 dBu, 1 kHz
Gain range: 0 dB to 44 dB (Mic)
Maximum Voltage Gain: 74 dB Ch. Mic Input → Main Mix out & Tape out, 80 dB Ch. Mic Input → Control room & phones
SNR (Signal to Noise Rate): ≧110 dBu
Phantom power (Mic Pin2/Pin3 and Pin1): +18 V

Line Input: Electronically balanced 
Frequency Response:20 Hz to 22 kHz, +/- 1 dB
Distortion (THD&N): ≦0.005% at +4 dBu, 1 kHz
Gain range: 15 dBu to 30 dBu


Stereo channels (Ch. 2 - 5)
Line Input: Electronically balanced
SNR (Signal to Noise Ratio): ≧110 dBu
Frequency Response: 20 Hz to 22 kHz, +/- 1dB
Distortion (THD&N): ≦0.005% at +4 dBu, 1 kHz
Gain range: 0 dBu
Maximum Voltage Gain: 30 dB Ch. Line → Main Mix out


Impedance
Microphone Input: 3.9 kOhms
All Other Input: 10 kOhms or Greater
Tape Out: 1 kOhms
All Other Outputs: 120 Ohms


Equalization
Mono channel: High ±15 dB @ 12 kHz, Low ±15 dB @ 80 Hz


Crosstalk
Adjacent Input: ≦-80 dB @ 1KHz (Ch. 1 - 6)
Input to Output: ≦-75 dB @ 1KHz (Stereo L/R, Ch. 1-4, Pan: panned hard left or right)


Main Mix Section
Output level: 0dBu Unbalanced, 1/4" Jacks
Max out: +22dBu Unbalanced, 1/4" Jacks
Noise (Bus noise): ≦-90 dB @ 20 Hz - 22 KHz (channel & Main level at 0 dB, other at minimum, DSP mute)


Power and Dims
Power Supply: 18 V, 500 mA
Rated Power Consumption: 9 W



Dimensions (WxLxH): 128.1mm x 204mm x 38mm
Weight: 1.65 lb

6-CHANNEL COMPACT MIXER
12 total inputs including XLR jacks w/ phantom power on ch. 1 & 2
Expanded channel count perfect for small groups or sub-mixes
High headroom circuitry offering extra dynamic range
Ultra-low-noise discrete mic preamps
2 aux sends per channel for external effects and monitoring
3-band EQ on each channel
Two stereo input channels with balanced TRS jacks
Aux inputs/outputs for external audio source integration
Switchable phantom power

TECH INFORMATION
Input Channels: Mono channels (Ch. 1 - 2)
Microphone Input: Electronically balanced, discrete input configuration
Frequency Response: 20 Hz to 22 kHz, +/-1 dB
Distortion (THD&N): ≦0.005% at +4 dBu, 1 kHz
Gain range: 0 dB to 50 dB (Mic)
Maximum Voltage Gain: 70 dB Ch. Mic Input→Main MIx out & Tape out, 80 dB Ch. Mic input→Control room & Phones, 60 dB Ch. Mic input→Aux send
SNR (Signal to Noise Ratio): ≧110 dBu
Phantom power (Mic Pin 2 / Pin 3 and Pin 1): +48 V - with switch control

Line Input: Electronically Balanced
Frequency Response: 20 Hz to 22 kHz, +/-1 dB
Distortion (THD&N): ≦0.005% at + 4 dBu, 1 kHz
Gain Range: 15 dBu to 35 dBu

Stereo Channels: (Ch. 3 - 6)
Line Input: Electronically Balanced
SNR (Signal to Noise Ratio): ≧110 dBu
Frequency Response: 20 Hz to 22 kHz, +/-1 dB
Distortion (THD&N): ≦0.005% at + 4 dBu, 1 kHz
Gain range: -20 dBu to +20 dBu, 60 dB Ch. Line → Main Mix out
Maximum Voltage Gain: 20 dB FX return → Main Mix out, 20 dB RCA Tape input → Main Mix out

Impedance
Microphone Input: 3.9 kOhms
All Other Inputs: 10 kOhms or greater
Tape Out: 1 kOhms
All Other Outputs: 120 Ohms

Equalization
Mono Channels: High ±15 dB @ 12 kHz, Mid ±15 dB @ 2.5 kHz, Low ±15 dB @ 80 Hz
Stereo Channels: High ±15 dB @ 12 kHz, Mid ±15 dB @ 2.5 kHz, Low ±15 dB @ 80 Hz

Main Mix Section
Tape, Aux, Phones Output
Output level: 0 dBu Unbalanced, 1/4" jacks, Max out +22 dBu Unbalanced, 1/4" jacks noise (Bus Noise): ≦-90 dB @ 20 Hz - 22 kHz (channel & Main level at 0 dB, other at minimum, DSP mute)

Power supply: 18 V, 1500 mA
Rated Power Consumption: 18 W


Dimensions (WxLxH): 202mm x 250mm x 58mm
Weight: 3.75 lb

8-CHANNEL COMPACT MIXER WITH EFFECTS
16 total inputs including XLR jacks w/ phantom power on ch. 1-4
On-board Alesis digital effects with 256 variations
Expanded channel count perfect for small groups or sub-mixes
4 mic input channels with gold-plated XLR and balanced line inputs
Two stereo input channels with balanced TRS jacks
High headroom circuitry offering extra dynamic range
Ultra-low-noise discrete mic preamps
3-band EQ on each channel
Footswitch input for effects on/off (sold separately)
2 aux sends per channel for external effects and monitoring
2-bus design with Main and Control Room 1/4” stereo outputs
Aux inputs/outputs for external audio source integration
Switchable phantom power

TECH INFORMATION
Input Channels: Mono channels (Ch. 1 - 4)
Microphone Input: Electronically balanced, discrete input configuration
Frequency Response: 20 Hz to 22 kHz, +/-1 dB
Distortion (THD&N): ≦0.005% At +4 dBu, 1 kHz
Gain range: 0 dB to 50 dB (Mic)
Maximum Voltage Gain: 70 dB Ch. Mic input → Main Mix out & Tape out, 80 dB Ch. Mic input → Control Room & Phones, 60 dB Ch. Mic input → Aux send
SNR (Signal to Noise Rate ): ≧110 dBu
Phantom power (Mic Pin 2 / Pin 3 and Pin 1): +48 V - with switch control

Line Input: Electronically Balanced
Frequency Response: 20 Hz to 22 kHz, +/-1 dB
Distortion (THD&N): ≦0.005% at + 4 dBu, 1 kHz
Gain Range: 15 dBu to 35 dBu

Stereo Channels: (Ch. 5 - 8)
Line Input: Electronically Balanced
SNR (Signal to Noise Ratio): ≧110 dBu
Frequency Response: 20 Hz to 22 kHz, +/-1 dB
Distortion (THD&N): ≦0.005% at +4 dBu, 1 kHz
Gain range: -20 dBu to +20 dBu, 60 dB Ch. Line → Main Mix out
Maximum Voltage Gain: 20 dB FX Return → Main Mix out, 20 dB RCA Tape input → Main Mix out

Impedance
Microphone Input: 3.9 kOhms
All Other Inputs: 10 kOhms or greater
Tape Out: 1 kOhms
All Other Outputs: 120 Ohms

Equalization
Mono Channels: High ±15 dB @ 12 kHz, Mid ±15 dB @ 2.5 kHz, Low ±15 dB @ 80 Hz
Stereo Channels: High ±15 dB @ 12 kHz, Mid ±15 dB @ 2.5 kHz, Low ±15 dB @ 80 Hz

Alesis DSP Section
A/D And D/A Converters: 24-bit
DSP Resolution: 24-bit
Type of effects: Hall, Room, Vocal & Plate Reverbs Mono & Stereo Delay (max delay time 650 ms) Chorus, Flanger & Reverb modulations, Reverb+Delay, Reverb+Chorus, Reverb+Flanger combinations
Presets: 256
Controls: 16 x 16-position preset selector
Crosstalk: Adjacent Input ≦-80 dB @ 1 KHz (Ch. 1-6) , Input to Output ≦-75 dB @ 1 KHz (Stereo L/R, Ch. 1-4, Pan: panned hard left or right)

Main Mix Section
Tape, Aux, Phones Output
Output level: 0 dBu Unbalanced, 1/4" Jacks, Max out +22 dBu Unbalanced, 1/4" jacks
Noise (Bus noise): ≦-90 dB @ 20 Hz ~ 22 KHz (channel & Main level at 0 dB, other at minimum, DSP mute)

Power supply: 18 V, 1500 mA
Rated power consumption: 27 W

Dimensions (WxLxH): 256mm x 250mm x 72mm
Weight: 5.07 lb

Peavey PV 6 BT Compact Mixer Features:
Versatile small-format mixer for your desktop recording needs
Bluetooth connectivity is great for podcasting and other applications
Selectable hi-Z preamp designed for electric guitar input
Onboard effects not normally found in such a small format
3-band EQ with bypass switches
Phantom power for your devices that require it
USB-B in and out directly connects to your computer

The PVi 4B powered mixer is easy to use and transport, and is designed with the latest Peavey technology.

PROFESSIONAL 8-CHANNEL/2-BUS MIXER
5 XLR inputs with DNA™ microphone preamps
Dynamic compression (channels 1-2)
3-band EQ plus 2 aux sends per channel
60mm faders with mute switch and LED
USB audio connectivity with level control
100 Alesis DSP effects
Balanced XLR, balanced/unbalanced 1/4” outputs
9-band graphic EQ for main or monitor outputs
Headphone out with independent level control

The Peavey PV 5300 is an all-in-one powered mixer, providing up to four combination XLR and 1/4" inputs using premium Peavey mic preamps, and 200 watts of peak power for crystal clear audio reproduction.

PROFESSIONAL 12-CHANNEL/2-BUS MIXER
7 XLR inputs with high- DNA™ mic preamps
Dynamic compression (Channels 1-4)
3-band EQ plus 2 aux sends per channel
60mm faders with mute switch and LED meters
USB audio connectivity with level control
100 Alesis DSP effects
Balanced XLR, balanced/unbalanced 1/4” outputs
9-band graphic EQ for main or monitor outputs
Headphone out with independent level control

The PVi 8B powered mixer is easy to use and transport, and is designed with the latest Peavey technology.

Introducing the next level in world-class non-powered mixer performance. The all new PV® series mixing consoles include Peavey's reference-quality mic preamps that spec in at an incredible 0.0007% THD, making the PV series mixers excellent for live or recording applications.

The all-new PV® 10 AT mixers come equipped with Antares® Auto-Tune® pitch correction, a technology that can literally help anyone sing in key and is used on professional recordings and live performances throughout the world.

Introducing the next level in world-class non-powered mixer performance. The all new PV® series mixing consoles include Peavey's reference-quality mic preamps that spec in at an incredible 0.0007% THD, making the PV series mixers excellent for live or recording applications.

The Peavey® PVi® 6500 is a revolutionary all in one powered mixer. Everything a musician needs providing up to 6 simultaneous combination XLR and 1/4" inputs using Peavey's award winning Silencer® mic preamps, and 400 watts of power for crystal clear audio reproduction.

The all-new PV® 14 AT mixers come equipped with Antares® Auto-Tune® pitch correction, a technology that can literally help anyone sing in key and is used on professional recordings and live performances throughout the world.

The Peavey PVi 8500 /PV 8500 is a revolutionary all-in-one powered mixer with everything a musician needs: up to eight combination XLR and 1/4" inputs using Peavey's awardwinning mic preamps, and 400 watts of peak power for crystal-clear audio reproduction.

PROFESSIONAL 16-CHANNEL/4-BUS MIXER
10 XLR inputs with DNA(TM) microphone preamps
Dynamic compression (channels 1-6)
3-band EQ with sweepable mids
4 aux sends; pre/post switching on sends 1+2
60mm faders with mute and PFL/AFL solo functions
100 Alesis DSP effects
USB audio connectivity with level control
Balanced XLR, balanced/unbalanced 1/4” outputs
Headphone out with independent level control
Switchable Phantom Power

The XR-S powered mixer incorporates an 8-channel mixer and 1,000 Watts of power (1,500 Watts peak) into a feature-rich, conveniently sized package.

PROFESSIONAL 24-CHANNEL/4-BUS MIXER
18 XLR inputs with DNA(TM) microphone preamps
Dynamic compression (channels 1-8)
3-band EQ with sweepable mids
4 aux sends; pre/post switching on sends 1+2
60mm faders with mute and PFL/AFL solo functions
100 Alesis DSP effects
USB audio connectivity with level control
Balanced XLR, balanced/unbalanced 1/4” outputs
Headphone out with independent level control
Switchable Phantom Power