Sound Equipment
Sound Equipment
Shure BETA 87C Vocal Microphone
Extremely smooth, tailored response for a warm, natural sound.
Alto Professional TX308 Speaker
2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF)
8-inch (203 mm) LF driver, 2.5-inch (65 mm) high-temperature voice coil
HF Driver: 1.4-inch (35 mm) neodymium magnet HF driver with precision waveguide
High quality, lightweight, cabinet design for easy transport, set up and installation
Pole-mountable, wedge monitor, bracket installation or flown application with integral M6 suspension points
Integrated 2-channel mixer with dual XLR 1/4-inch combo mic/line inputs, independent level controls, XLR Link output, Contour EQ switch and Ground-Lift switch
Custom-engineered high-efficiency class D amplifiers with passive cooling design – no fan means the speaker runs cleaner, quieter and has greater long-term reliability
Designed and tuned in the USA
TECH INFORMATION
Output Power: 2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF)
LF Driver: 8-inch (203 mm) LF driver, 2.5-inch (65 mm) high-temperature voice coil
HF Driver: 1.4-inch (35 mm) neodymium magnet HF driver with precision waveguide
Crossover: 2.5 kHz
Maximum SPL: 129 dB peak, 126 dB continuous (dB SPL @ 1 m)
Frequency Response: 62 Hz – 20 kHz (+ 3 dB)
Frequency Range: 52 Hz – 22 kHz (-10 dB)
Horn Coverage: 90° H x 60° V nominal
Equalization: Contour Switch Low and High Frequency +3dB Boost
Connectors: (2) XLR/TRS 1/4” (6.35 mm) combo inputs, (1) XLR link output, (1) IEC power cable input
Controls: (2) Volume, Power on/off switch, Contour switch, Ground-Lift switch
Indicators: 2 x Power LED (front and rear), Clip limiter LED
Protection: Electronic clip, Thermal and transducer overdrive protection
Power Connection: IEC with Mains Fuse
AC Voltage Input: 100,110-120,220–240 V, 50/60 Hz
Enclosure: Trapezoidal, injection-molded, polypropylene enclosure, with perforated steel grille
Mounting/Installation: 36 mm standard pole mount, Wall or celling mount using TSB810 bracket, Flown application with integral M6 suspension points, Wedge monitor
Dimensions: (H x W x D): 17.1” x 10.1” x 9.6” / 434mm x 256mm x 245mm
Net Weight: 20.2 lbs. / 9.2 kg.
Design Origin: Designed and tuned in the USA
Accessories: TSB810 Bracket, TS208 Cover
Alto Professional TX308 Speaker
Alto Professional TX215 Speaker
600 Watts peak, 300 Watts continuous Class D power
The newly designed horn delivers greater coverage 90° H x 60° V
The full grille delivers style and provides protection for your investment
15-inch (381 mm) LF driver, 2-inch (50.8 mm) voice coil
1-inch (25.4 mm) neodymium HF compression driver
Lightweight, portable design for main or wedge monitor operation
Standard speaker pole socket
Bi-amplified design with precision active crossover and EQ
Balanced XLR/TRS with selectable Mic/Line input. XLR Link Output, Contour EQ switch and Ground-Lift switch
Integrated analog limiter and overload protection circuitry
Designed and tuned in the USA
TECH INFORMATION
Power Output: 600 W peak (400 W LF + 200 W HF), 300 W continuous (200 W LF + 100 W HF) Class D power
LF Driver: 15-inch (381 mm) LF driver, 2-inch (50.8 mm) voice coil
HF Driver: 1-inch (25.4 mm) neodymium HF compression driver
Crossover: 2.2 kHz
Maximum: 119 dB at 1m
Frequency Response: (-3dB): 65 Hz – 20 kHz
Horn Coverage: 90° H x 60° V nominal
Equalization: Contour Switch Low and High Frequency +3dB Boost
Connectors: (1) XLR/TRS 1/4” (6.35 mm) combo input, (1) XLR link output, (1) IEC power cable input
Controls: (1) Volume, Power on/off switch, Contour switch, Ground-Lift Switch
Indicators: (2) Power LED (front and rear), Clip limiter LED
Protection: Overload Analog Limiter / Compressor, Thermal Protection
Power Supply: 100V-240V ~ 50/60Hz
AC Voltage Input: 100,110-120,220–240 V, 50/60 Hz
Fuse:100–120V T4AL AC250V, 220–240V T2AL AC250V
Power Consumption: 260 W
Enclosure Construction: Injection-molded polypropylene enclosure, multi-angle for main or monitor applications, metal grille, rubber feet, 2 handles (both sides)
Mounting/Installation: Standard speaker pole socket, Wedge Monitor
Dimensions: (H x W x D): 24.7" x 15.2" x 14.6" / 627mm x 386mm x 371mm
Net Weight: Net Weight: 32.4 lbs / 14.7 kg.
Alto Professional TX215 Speaker
Alto Professional TX310 Speaker
2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF)
10-inch (254 mm) LF driver, 2.5-inch (65 mm) high-temperature voice coil
HF Driver: 1.4-inch (35 mm) neodymium magnet HF driver with precision waveguide
High quality, lightweight, cabinet design for easy transport, set up and installation
Pole-mountable, wedge monitor, bracket installation or flown application with integral M0 suspension points
Integrated 2-channel mixer with dual XLR 1/4-inch combo mic/line inputs, independent level controls, XLR Link output, Contour EQ switch and Ground-Lift switch
Custom-engineered high-efficiency class D amplifiers with passive cooling design – no fan means the speaker runs cleaner, quieter and has greater long-term reliability
Designed and tuned in the USA
TECH INFORMATION
Output Power: 2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF)
LF Driver: 10-inch (254 mm) LF driver, 2.5-inch (65 mm) high-temperature voice coil
HF Driver: 1.4-inch (35 mm) neodymium magnet HF driver with precision waveguide
Crossover: 2.5 kHz
Maximum SPL: 129 dB peak, 126 dB continuous (dB SPL @ 1 m)
Frequency Response: 54 - 20 kHz (+/- 3 dB)
Frequency Range: 48 Hz - 22 kHz (-10 dB)
Horn Coverage: 90° H x 60° V nominal
Equalization: Contour Switch Low and High Frequency +3dB Boost
Connectors: (2) XLR/TRS 1/4” (6.35 mm) combo inputs, (1) XLR link output, (1) IEC power cable input
Controls: (2) Volume, Power on/off switch, Contour switch, Ground-Lift switch
Indicators: 2 x Power LED (front and rear), Clip limiter LED
Protection: Electronic clip, Thermal and transducer overdrive protection
Power Connection: IEC with Mains Fuse
AC Voltage Input: 100,110-120,220–240 V, 50/60 Hz
Enclosure: Trapezoidal, injection-molded, polypropylene enclosure, with perforated steel grille
Mounting/Installation: 36 mm standard pole mount, Wall or ceiling mount using TSB810 bracket, Flown application with integral M10 suspension points, Wedge monitor
Dimensions: (H x W x D): 20.6” x 12.6” x 11.8” / 524mm x 320mm x 300mm
Weight Net Weight: 26.1 lbs. / 11.9 kg.
Design Origin: Designed and tuned in the USA
Accessories: TSB810 Bracket, TS210 Cover
Alto Professional TX310 Speaker
Alto Professional Live 1202 Mixer
7 XLR inputs with high- DNA™ mic preamps
Dynamic compression (Channels 1-4)
3-band EQ plus 2 aux sends per channel
60mm faders with mute switch and LED meters
USB audio connectivity with level control
100 Alesis DSP effects
Balanced XLR, balanced/unbalanced 1/4” outputs
9-band graphic EQ for main or monitor outputs
Headphone out with independent level control
Alto Professional Live 1202 Mixer
Shure SM87A Vocal Microphone
Sensitive condenser vocal microphone features a smooth, tailored response for a warm, accurate sound.
Powerwerks PWRP3 Portable PA
120 WATT Active PA
3 x 6.5" Speakers
Available with Bluetooth
Powerwerks PWRP3 Portable PA
Alto Professional Amplified Presenter PA
Microphone volume with mute button, aux volume for 1/8” (3.5 mm) aux and Bluetooth inputs
XLR microphone input (microphone not included), (1) 1/8” (3.5 mm) stereo aux input, (1) 4-pin XLR input (for podium lamp, not included)
Streams music wirelessly from any Bluetooth-enabled device
Built-in rechargeable battery delivers up to 33 hours of continuous use
Battery level indicator
USB charging port for phone, tablet or other devices
Microphone Included
Alto Professional Amplified Presenter PA
Shure SM27 Multi-Purpose Microphone
Large diaphragm, side-address cardioid condenser microphone for stage and studio applications.
Shure SM27 Multi-Purpose Microphone
Shure KSM137 Instrument Microphone
A versatile, durable, and precise single cardioid polar pattern instrument microphone.
Shure KSM137 Instrument Microphone
Shure SM81 Instrument Microphone
Industry-standard mic renowned for sonic accuracy in stage and studio performances.
Alto Professional Stealth Wireless System
Add wireless audio connectivity to any active loudspeaker
Enjoy faster setups and teardowns
Eliminate complex cable runs
Dual-channel transmitter (x1) with two XLR+1/4
Single-channel receivers (x2) with one XLR output (per unit)
Replaces up to 200' of console-to-system cabling
No compromise in audio quality
Reliable UHF band; 16 selectable channels
Adjustable squelch eliminates interference
Grow your system using the Stealth Wireless Expander Pack* (sold separately)
Transmitter: (2) XLR+1/4 combo inputs
Receiver: (1) XLR output (per receiver)
TECH INFORMATION
TRANSMITTER
Type: Dual Channel Transmitter
RF Frequency: 540 - 570 MHz
Oscillation Type: PLL
Preset Channels: 16 Channels (stereo)
Frequency Response: 50 Hz ~ 17 kHz / 3dB
Bandwidth: 24 MHz or 30MHz
Frequency Stability: 0.005%
Frequency Deviation: 20 kHz
LED Indicators: Power On/Off, Sig/Clip
Power External Adaptor, 12 VDC/300 mA
Output Power: <10 mW
Controls: Power Switch; Channel Select; Mono/Stereo Switch
Dimensions: 6.32 x 5 x 4 inches (with antennae)
Weight: 10.2 ounces (290 grams)
RECEIVER
Type: Single Channel Receiver
Preset Channels: 16 Channels
RF Frequency: 540 - 570 MHz
S/N Ratio: >100 dB/A
RF Sensitivity: -100 dBm
Image Rejection: >70 dB
T.H.D.: < 0.5% ﹫1kHz
LED Indicator: Power On, RF/AF LED Indicator
AF output Impedance: 660Ω balanced
Squelch: 3-step & Pilot Tone
Operation Voltage: 12 VDC,300 mA
Dimensions: 4.58 x 2.74 x 1.24 inches (with antennae
Weight (each): 4.15 ounces (117.7 grams)
Alto Professional Stealth Wireless System
Electro-Voice ZLX-12P Powered Speaker
Electro-Voice ZLX-12P Powered Speaker
Shure KSM141 Dual-Pattern Instrument Microphone
End-address condenser microphone with mechanically switching dual polar patterns.
Shure KSM141 Dual-Pattern Instrument Microphone
Alto Professional TS312S Speaker
2000 watts of peak power output
High-efficiency Class D amplifier
Transducer: 12-inch with 3-inch high-temperature voice coil
(2) XLR+1/4-inch combo inputs + (2) balanced XLR line outputs
XLR outputs, with six discreet output modes for ideal matching with companion speaker
Polarity Reverse switch and Extended LF switch for increased EQ control
Electronic clip, thermal and transducer overdrive protection
Rugged, internally-braced front-ported MDF cabinet with integrated 36mm pole socket
Rugged, mar-resistant splatter-spray finish always looks good, even with heavy use
Designed and tuned in the USA
TECH INFORMATION
Output Power: 2000 W peak, 1000 W continuous
Amplifier: High-efficiency Class D amplifier
Transducer: 12” (305 mm) woofer, 3” (76 mm) voice coil
Frequency Response: 44HZ – 95Hz (- 3 dB)
Frequency Range: 38Hz – 110Hz (-10 dB)
Maximum SPL: 129 dB (@ 1 m) 126 dB continuous (dB SPL @ 1 m)
Connections: (2) XLR+1/4” (6.35 mm) inputs; (2) XLR outputs; (1) IEC power cable input
Input Level: Line +4 dBu (nominal)
External Controls: Volume control, output mode switch, polarity-reverse switch, extended low-frequency switch, power switch
Indicators: Signal/clip limiter LED, polarity-reverse LED, extended low-frequency LED, power switch LED
Electronic Protections: Electronic clip, thermal and transducer overdrive protection
Enclosure: Internally braced MDF cabinet; 36 mm mounting pole socket on top panel
Rugged, mar-resistant splatter-spray finish always looks good, even with heavy use
Power Connection: IEC with Mains Fuse
AC Voltage Input: 100,110-120,220–240 V, 50/60 Hz
Consumption: 1000 W Fuse: T10AL AC250V (100–120 V) or T5AL AC250V (220–240 V)
Dimensions (H x W x D): 17.9” x 18.1” x 19.9” / 456mm x 459mm x 505mm
Weight: 55.12 lbs. / 25 kg
Design Origin: Designed and tuned in the USA
Accessories: TS312S Cover
Alto Professional TS312S Speaker
Alto Professional TX212 Speaker Pair
Alto Professional TX212 Speaker Pair
Powerwerks PWR10 High Power Active Speaker
600 Watts Peak
Available with Bluetooth
And Bluetooth True Stereo Link
Powerwerks PWR10 High Power Active Speaker
Alto Professional Live 1604 Mixer
10 XLR inputs with DNA(TM) microphone preamps
Dynamic compression (channels 1-6)
3-band EQ with sweepable mids
4 aux sends; pre/post switching on sends 1+2
60mm faders with mute and PFL/AFL solo functions
100 Alesis DSP effects
USB audio connectivity with level control
Balanced XLR, balanced/unbalanced 1/4” outputs
Headphone out with independent level control
Switchable Phantom Power
Alto Professional Live 1604 Mixer
Alto Professional Spectrum PA
Three channel mixer: line/mic 1, line/mic 2, and Aux
XLR, RCA, ¼” and 1/8” connectors
2-Band (LF/HF) built-in EQ for each channel
Full Bluetooth® capability for streaming input signals wirelessly (plus wireless linking of another Spectrum PA for stereo applications)
Built-in dual LED arrays provide brilliant light show
Five customizable lighting modes: Mood, Meter, Mix, Pulse, Party
Brightness control lets you adjust or disable LEDs
Custom Color Control—easily adjust the desired mix of Red, Green, and Blue lighting
Adds powerful sound and visual flair to any Karaoke event or other performance
Ultra-portable form factor for clean, uncluttered setups
Perfect for any occasion where additional lighting equipment would add clutter
Stand-mountable with 35mm threaded pole socket
Rugged: Scuff-resistant black vinyl wrap and protective steel corners
Easily transportable: Lightweight (just 23 lbs.) and built-in handle.
TECH INFORMATION
System Type: 2-way bi-amplified powered loudspeaker with sound-reactive LED lights
Power Amplifier: Bi-amplified; 200 W peak: 130 W LF + 70 W HF
High Frequency: (1) 1” (25.4 mm) neodymium compression driver
Low Frequency: (3) 6.5” (165 mm) with 1” (25.4 mm) voice coil
Frequency Response: 65 Hz – 20 kHz
Crossover Frequency: 1.8 KHz, electronic
Maximum SPL: 94 dB SPL
Light Type: 38 tri-color (red-green-blue) high-intensity LEDs; 12 W total
Light Modes: 5 modes: Mood, Meter, Mix, Pulse, Party
Light Controls: Mode selection knob; color selection knob with RGB preview LED; brightness knob
Connections: (2) XLR-1/4” (6.35 mm) TRS combination inputs (Channels 1 & 2) (1) 1/8” (3.5 mm) TRS/stereo input (Channel 3) (1) RCA (line-level) stereo input pair (Channel 3) (1) XLR link output (1) IEC AC power connection
Equalization: 2-band (LF, HF) for Channels 1 & 2
Bluetooth: A2DP streaming audio with full stereo link when using 2 Spectrum PA units
Protections: Thermal, overload
Enclosure: Trapezoidal wood cabinet MDF enclosure with vinyl wrap; black metal protective corners; molded, ergonomically designed plastic handle; 4 rubber feet; 36 mm pole socket for stand mounting
AC input: 100 V AC, 50/60 Hz (+10%) 110-120 V AC, 50/60 Hz (+10%) 220-240 V AC, 50/60 Hz (+10%)
Fuse: 100-120 V T1.6AL AC250V 220-240 V T800mAL AC250V
Dimensions (H x W x D): 29.16” x 8.36” x 10.12” / 741 mm x 212 mm x 257 mm
Weight: 22.4 lbs./ 10.2 kg
Powerwerks PWRS1 System One
Powered Column Array System
Available with Bluetooth
And Bluetooth True Stereo Link
Powerwerks PWRS1 System One